Installation - Klarstein Lady Marmalade Manual

INSTALLATION

• Remove all parts of the appliance and the operating instructions from the
packaging.
• Remove all packing material.
Disposal of the packaging
• The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness and
disposal technology and are therefore recyclable.
• The return of packaging into the material circuit saves on raw materials and reduces
the amount of generated waste. Dispose of the packaging material that is no longer
needed as per the locally established regulations.
• If possible, keep the original packaging of the product so that you can return it in its
original packaging if necessary.
Note: Check the unit for completeness and visible damage before use. If any parts of
the unit are missing or have been damaged in transit or packaging, contact Customer
Service.
Appliance set up
• Completely unwind the power cable from the cable storage.
• Place the appliance on a level and slip-free surface. Ensure that a mains power
socket is easily accessible.
• Clean the appliance as described in the chapter "Cleaning and Care".
• Fix the pouring tap to the outside of the appliance using a washer and a nut from
the inside (as shown in the figures below).
• Insert the plug into a mains power socket. The display lights up, a signal tone is
heard.
Note: Never operate the appliance in a no-load condition! The appliance could be
irreparably damaged!
EN
19