Page 1
PLEASE READ THE FOLLOWING BEFORE UNSCREWING THE CROWN SCREW-DOWN CROWN Screw-down crowns are used to ensure water resistance. Always be certain that your crown is tightly screwed down. ( Position “0”, “1“ and “2“ are NOT secured for water resistance ). Do NOT unscrew your crown while you are in any environment where moisture is present.
Page 2
USING THE SCREW-DOWN CROWN Do NOT pull the crown unless it is unscrewed first. : Turn the crown anti-clockwise until it TO UNSCREW turns freely without tension. Once the crown is fully unscrewed, it automatically sets itself into position “0”. GENTLY pull the crown out to the other desired positions for watch setting.
Page 3
NB-6005 NH38 Japan Automatic with Open Heart Display NB-6007 SW200 Swiss Made Dual Satellite Customization, Self-wind QUARTZ CHRONOGRAPH WITH DATE VD53 24 Hour Minute Hand Screwed Button A Hour Hand Down Position Chronograph Minute 0 1 2 Crown Positions Second Hand Button B Chronograph Second Date...
DATE SETTING 1. Unscrew the crown by turning it anti-clockwise untill it turns freely. 2. Pull the crown out to position 1. 3. Turn the crown clockwise to set the date. 4. Push the crown back and screw it tight by turning clockwise. * Do not set the date between 9:00 P.M.
HOW TO USE THE CHRONOGRAPH TIME: 11:00 TIME: 11:00 * The measurement time is indicated by the chronograph hands that move independently of the center hands (and 24-hour hand). * The chronograph can measure up to 60 minutes. Standard measurement (e.g. 100m race) Press the buttons in the following order : TIME: 6:44 TIME: 6:44...
Page 6
Accumulated elapsed time measurement (e.g. basketball game) TIME: 6:44 TIME: 6: START STOP RESTART STOP RESET *Restart and stop of the chronograph can be repeated as many times as necessary by pressing button A. TIME: 11:59 TIME: 11: 3 0 0 M / 5 0 0 M / 1 0 0 0 M / 5 0 0 M /...
Page 7
Split time measurement (e.g. 5,000m race) TIME: 6:44 TIME: 6:44 TIME TIME: 6:44 START SPLIT SPLIT RELEASE STOP RESET * Measurement and release of the split time can be repeated as many times as necessary TIME: 11:59 TIME: 11:59 TIME: 11:59 by pressing button B.
Page 8
ADJUSTING THE CHRONOGRAPH HANDS POSITION * Before setting the time, check if all the chronograph hands - second and minute - are at the “0”position (12 o’clock position). * If the chronograph is in use, press the buttons in the following order to reset it, and then, check if the hands return to “0”...
Page 9
If either of the chronograph hands are not in the “0” position, reset them following the procedure below. 1. Unscrew the crown by turning it anti-clockwise until it turns freely. 2. Pull the crown out to position 2. 3. Press button A or B to reset all chronograph hands to “0” position. * The chronograph minute hand moves correspondingly with the chronograph second hand.
Need help?
Do you have a question about the DEIMOS and is the answer not in the manual?
Questions and answers