Connect Trigger Or Sensor; Dual Trigger Fail-Safe (If Applicable) - Spraying Systems AUTOJET 1550+ Quick Start Manual

3.
CONNECT TRIGGER
OR SENSOR
Connect cable to "Trig" connection that will be used
to start spray sequence. Available triggers are:
• Trigger cable (for use with customer-supplied
trigger signal)
• Sensor (type should be selected based
on customer's application)
- Photo
- Prox
- Laser
- Thru-beam
• Handheld trigger
4.
DUAL TRIGGER FAIL-SAFE
(IF APPLICABLE)
For fail-safe operation, or when dual trigger signals
will run the system, connect trigger interlock cable
to "T. int." connection.
1550
+
SPRAY CONTROLLER
1550
+
SPRAY CONTROLLER