Linde AGA AQVIA User Manual page 8

Sparkling water maker
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
Attaching the water bottle
Remove the lid from the water bottle. Position
the bottle so that the gas tube protrudes into the
water and then push the bottle up as far as it will
go. Turn the bottle as shown in the illustration
until you feel it engage. Make sure that the water
bottle is firmly in place before use.
Carbonating water
Important! Never carbonate anything other than pure drinking water, as sugar
or other additives might cause the pressure relief valves to stick, rendering the
machine unsafe to use.
The degree of carbonation is a matter of
personal taste, so for the first few times
you use the machine, you will have to
experiment until you find the degree
of carbonation that is right for you.
To carbonate the water, press the button
and keep it pressed for 3-4 seconds or
until you hear a hiss as the pressure relief
valve opens. Depending on the water
temperature, this will give you a normal
degree of carbonation.
You can add more gas as desired by
pressing the button again briefly once or twice. Release the button and wait until you hear
another hiss as any excess pressure is discharged and the water bottle is vented.
Unscrew the water bottle and enjoy your carbonated water. Store the water in a cool place
with the lid tightly screwed on to prevent the water going flat.
8

Advertisement

Table of Contents
loading

Table of Contents