Table of Contents
Advertisement
Symptom
No cursor movement
Cursor does not move along
diagonals
No scanning
S040144
For use with firmware 110.0
Possible Cause
Unit is in Switch Scanning Mode
Diagonal Cursor Movement not enabled
Diagonal Scanning not enabled
*All trademarks are used for illustrative purposes only, are the property of
Troubleshooting
Remedy
Switch to Mouse Mode using the
guidance in the above section
entitled Switching between Mouse
and Switch Scanning Modes.
Enable Diagonal Cursor Movement
in Learn – Mouse Mode.
Enable Diagonal Scanning in
Learn- Switch Scanning.
Unit 37 Corringham Road Industrial Estate
Gainsborough Lincolnshire DN21 1QB UK
Tel +44 (0) 1427 678990 Fax +44 (0) 1427 678992
their respective owners, and are acknowledged.
www.pretorianuk.com
Advertisement
Table of Contents
