Application - Neomatica ADM33 Operation Manual

Immobilizer is used for being installed on moving and stationary objects to control
electrical circuit.
Immobilizer can operate as a part of monitoring system with the tracker ADM333 BLE.
Immobilizer can be used as an electromechanical relay with switching group of contact
elements or as a two-channel output with overcurrent protection.
Can be installed on vehicles to block electrical circuit of the ignition system or of the
fuel supply in order to block the engine work or engine start-up. Can be installed on stationary
objects as a switcher with wireless control.
«Neomatica» Wireless sensor-immobilizer ADM33, edition 1.1 dd 11.11.2019

1. Application

Fig. 1. ADM33 general view
4