Neomatica ADM33 Operation Manual page 12

9) In a new tab a window will appear with the demand to enter a password. Enter a
password for authorization. By default is 123456;
10) After connection, on the first tab there will be three sections: "Generic Access",
"Generic Attribute", "Nordic UART Service". Press "Nordic UART Service". There will
appear the following menu:
11) Field "RX Characteristic" will be used for settings and commands sending. Field "TX
Characteristic" will be used to display responses. Next to the field "TX Characteristic"
there are three arrows pointing down. Click on these arrows, afterwards they will be
crossed out by a cross. Now the immobilizer is ready to receive your commands.
12) To send commands click on the arrow pointing up, next to the field "RX Characteristic".
There will appear a window for entering the following commands:
«Neomatica» Wireless sensor-immobilizer ADM33, edition 1.1 dd 11.11.2019
12