Command Description - Neomatica ADM33 Operation Manual

Command Answer
1 be be
2 ds ds
3 rs rs
4 rb rb
5 wf wf
6 cp X cp
7 сr X cr
8 br Х br
9 ar Х ar
10 ts ts
«Neomatica» Wireless sensor-immobilizer ADM33, edition 1.1 dd 11.11.2019

5. Command description

Parameters
Command without parameters
Command without parameters
Command without parameters
Command without parameters
Command without parameters
X – password. Consists only of Arabic numerals
X – operation mode
0 – electromechanical relay;
1 – semiconductor switch (only output 1);
2 – semiconductor switch (only output 2);
3 – semiconductor switch (outputs 1 and 2).
Х – immobilizer status
0 – COM+NC (by default);
1 – COM+NO.
Х – immobilizer status
0 – COM+NC;
1 – COM+NO (by default).
Х – types of actions:
0 – do nothing;
Description
Switch to firmware update mode
Reset to the factory settings
Description of response
Description of response
Save settings
Password change
Select immobilizer operation mode
Select initial immobilizer status after
power switch on
Select emergency status of immobilizer
Action to be performed at the absence of
connection with the tracker.
15