Table of Contents
Advertisement
Getting Started
Configure SoundGrid and assign your devices as follows, however large or small your system.
Connect the hardware
Install the software
Configure your system
Connect the Hardware
One I/O
In this example, one Allen & Heath M-Waves expansion card is used to connect a console to the SoundGrid host
application SoundGrid ASIO/Core Audio driver for plugin processing and/or DAW playback/recording. The interface is
connected directly to the host using a Cat 5e Ethernet cable or better.
The host computer's LAN port that's connected to the SoundGrid network should be used for SoundGrid only. Do not
share this port with the internet or other networks.
In this configuration, all plugin processing is carried out on the host computer. The speed and power of the host defines
overall latency.
5
SoundGrid host computer
A&H console with SoundGrid I/O
Allen & Heath M-Waves / User Guide
Advertisement
Table of Contents
