Device Firmware; Identify A Device On The Soundgrid Network - ALLEN & HEATH M-Waves V1 User Manual

Device Firmware

An I/O that is using outdated or incompatible firmware will not work properly in a SoundGrid network until its firmware is
updated. The color of the FW button in a device slot indicates the current firmware status.
SoundGrid Studio
If a device requires updated firmware, click on the FW button to start a hardware scan. Do not disconnect the device or
turn off the computer before Done appears. Once the update is ready, turn the device off and on to reset.

Identify a Device on the SoundGrid Network

SoundGrid Studio
10
Grey
Blue
Red
SoundGrid QRec
Click on the ID button to activate a hard-to-miss LED on the front panel of
the corresponding hardware device. You can also activate the front panel
from the top bar of the device's control panel.
SoundGrid QRec
Compatible firmware
Compatible firmware, but a newer version exists
Firmware not compatible and must be updated in order to use
Allen & Heath M-Waves / User Guide