Contents Overview About this Guide Features A Quick Look at the AV Encoder Front Panel Using the Front Panel for Basic Operation Muting Audio and Video from the Front Panel Front Panel Display Menu User Access to the Web Interface Muting Audio or Video from the Web Interface Working with Audio Selecting Cameras...
Basic troubleshooting It does not include installation or system administration and setup. For complete product information, see the Complete Manual for the AV Bridge MATRIX PRO AV Encoder, which includes unpacking and installation, system administration, configuration, and technical specifications. Features...
Operator's Guide to the AV Bridge MATRIX PRO AV Encoder A Quick Look at the AV Encoder Here's what all the controls do, and what all the connectors are for. Front Panel The front panel controls may be locked by the administrator.
Operator's Guide to the AV Bridge MATRIX PRO AV Encoder Using the Front Panel for Basic Operation The front panel provides basic information and controls. Note The administrator has the option to lock the front panel. Muting Audio and Video from the Front Panel You may choose to mute audio, video, or both for privacy, or while preparing the room for a meeting or other event.
Page 6
1080P/60fps for USB 3.0. Vaddio’s USB streaming devices have a very wide resolution table to be compatible with an assortment of soft codecs as well as being browser friendly (IE, Chrome, Firefox, Safari to name a few). They also use the USB video (UVC) and audio (UAC) drivers inherent within the computers OS, so there's no need for separate or proprietary drivers.
Operator's Guide to the AV Bridge MATRIX PRO AV Encoder Versions: Information only. This menu displays the firmware versions in use. User Access to the Web Interface You can access the web interface using the device's IP address – or its hostname, if your network supports hostname resolution.
Operator's Guide to the AV Bridge MATRIX PRO AV Encoder Muting Audio or Video from the Web Interface Audio and video mute controls are available on the front panel and at the top of each page of the web interface.
Operator's Guide to the AV Bridge MATRIX PRO AV Encoder Selecting Cameras PERATOR OME PAGE The web interface shows the active video sources in red. Depending on the current configuration, you may be able to set Stream and Program outputs separately. If the device is configured to route the stream to the Program output, the web interface displays only one row of buttons for the video output.
Operator's Guide to the AV Bridge MATRIX PRO AV Encoder Moving to Camera Presets PERATOR OME PAGE If presets have been defined for the selected video input, they are available on the Home page. The administrator has the option to customize the labels for the video inputs and the presets for each.
Operator's Guide to the AV Bridge MATRIX PRO AV Encoder About Viewing Streams Streaming is disabled by default. The USB stream and IP stream are enabled separately. If you are unable to view the desired stream, this usually means it is not enabled. Contact your system administrator.
Operator's Guide to the AV Bridge MATRIX PRO AV Encoder Going to Standby (Low Power) Mode LL PAGES The standby control is available at the top of each page of the web interface. When the system is in standby, no audio or video is sent or received and most of the web interface controls are unavailable.
Need help?
Do you have a question about the AV Bridge MATRIX PRO and is the answer not in the manual?
Questions and answers