Page 2
Operating manual ZX09/20/21-Series Zander GmbH & Co. KG Am Gut Wolf 15 52070 Aachen, Germany info@zander-aachen.de www.zander-aachen.de Item no.: E61-436-00 Version: N01 This document is the English translation. Technical Changes reserved, all information is subject to change. H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany • Tel +49 241 9105010 Fax +49 241 91050138 •...
Operating manual ZX09/20/21-Series 1. About this document ................. 7 1.1 Validity ......................7 1.2 Target group ....................7 1.3 Explanation of symbols ................7 2. General safety instructions ................ 8 3. About this device ..................9 3.1 Product information ..................9 3.2 Delivery content and supplies ..............
Page 4
Operating manual ZX09/20/21-Series 5.5.5 The SSI-Interface (only ZX09A, ZX09D and ZX09E) ......28 5.5.6 Connection of an Encoder to the SSI-Interface ........29 5.5.7 TTL differential signal inputs (only ZX09A, ZX09D, ZX09E) ....30 5.5.8 TTL differential signal outputs (only ZX09A, ZX09D, ZX09E) ....30 5.5.9 Connection of the In-/Outputs for the TTL differential signals ....
Operating manual ZX09/20/21-Series • Only authorised and qualified personnel may install the device and put it into operation, i.e. personnel which - is well-acquainted with correct technical handling of the electrical machine equipment, - is familiar with the applicable regulations concerning occu- pational safety and accident prevention, - has read and understood the operating manual and, if applicable, the programming manual...
Operating manual ZX09/20/21-Series About this device Product information The ZX09– and ZX20/21-series are high-speed industrial programmable logic control- lers (PLCs). They can be used as stand-alone PLCs or in a network as decentralized PLCs for parallel processing of signals in real time. This is made possible by the heart of every ZX-control: A Field Programmable Gate Array (FPGA).
Operating manual ZX09/20/21-Series Intended usage The ZX09- und ZX20/21-Series have been designed for the use in machines and plants for industrial use. They must be installed in switch cabinets or appropriate hous- ings with minimum degree of protection IP54. The approved operating parameters for use must be complied with (see chapter 12 “Technical data”).
Operating manual ZX09/20/21-Series 3.6.5 ZX21TP / ZX21TC Fig. 5: Device diagram ZX21TP / ZX21TC Assembly Please note: The device must be installed in a switch cabinet or suitable housing with a minimum degree of protection of IP54 • Mount the controller on a 35 mm mounting rail according to EN 60715 •...