Table of Contents
Advertisement
REPLACING THE GASKETS. The gaskets can be either
attached without adhesive by fitting the studs on the back of
the gasket flaps into the corresponding extruded holes, or fixed
with adhesive into the gasket grooves. We recommend that you
always replace all gaskets at the same time. Use only original
Aurora gaskets.
NOTE: You can obtain detailed information about replacing
gaskets from Aurora customer service.
MAINTAINING THE FRAME.
Danger:
Heat Exchanger Failure
You should always consult Aurora before changing or
replacing frame components. Frame component design is
governed by pressure vessel codes, and failure to comply
with those codes can result in heat exchanger failure and
danger to the operator.
Regularly carry out simple maintenance work, for example:
1. External cleaning.
2. Greasing.
3. Repairing damage to the paintwork at the frame of the
plate heat exchanger.
NOTE: You can obtain detailed information about maintenance
of the frame from Aurora.
11
ITEM A-03-343
DATED NOVEMBER 2012
SUPERCEDES MARCH 2011
Advertisement
Table of Contents
