Advertisement
Available languages
Available languages
Quick Links
PACKAGE CONTENTS
A - Top cover x 4
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shaded areas as these areas will not allow the batteries to fully charge and will reduce
the nighttime operating hours for your light. Ensure that the installation location is away from other nighttime light sources such as street or porch lamps. These light
sources may prevent your solar light from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Preparing for installation
NOTE: The solar panel will turn
the light on automatically at
dusk.
□ Push the power button on the
bottom of the light body (A) to turn
the light on. Check that the light is
on by covering the solar panel with
your hand to simulate darkness.
□ Cut the connector between the
stakes (C).
□ Insert the two stakes into each
other's slot.
□ Firmly insert the posts of the
assembled stake into the holes
on the bottom of the light body.
Use and Care Guide
Solar LED Deck Light
A
B
B - AAA 1.2V 900mAh Ni-Mh
rechargeable battery (pre-installed) x 4
C
C - Stake x 4
2
Installation options
NOTE: Do not use a hammer. If the ground is hard, use
water to soften it or a trowel to loosen the soil.
2a
Ground Installation
□ Push the assembly firmly into the ground.
2b
Deck or rail mount
NOTE: Screw anchors (E) are included for extra support. The
included screws are designed to screw easily into wood. If
you would like a more permanent or secure hold, install the
anchors prior to attaching the light to the surface.
□ Attach the light body on the deck (without the stakes) with screws
provided (D).
Please contact 1-855-HD-HAMPTON for further assistance.
Item #1005 698 176
Model #62805
D
D - Screw x 8
E - Anchor x 8
A
C
A
C
D
A
DECK
D
A
DECK
HAMPTONBAY.COM
E
Advertisement
Related Manuals for HAMPTON BAY 62805
Summary of Contents for HAMPTON BAY 62805
- Page 1 Item #1005 698 176 Model #62805 Use and Care Guide Solar LED Deck Light PACKAGE CONTENTS A - Top cover x 4 B - AAA 1.2V 900mAh Ni-Mh C - Stake x 4 D - Screw x 8 E - Anchor x 8...
- Page 2 Maintenance Replacing the battery CAUTION: When replacing the battery, use one (1) 900 mAh NiMH AAA 1.2V rechargeable battery. IMPORTANT: Dispose of the batteries in accordance with local, state, and federal regulations. NOTE: For best performance, replace with a rechargable 1.2V AAA NiMH battery of 900 mAh or greater every 3 years or when performance diminishes.
- Page 3 Artículo #1005 698 176 Modelo núm.62805 Guía de uso y cuidado Lámpara LED para terraza CONTENIDO DEL PAQUETE E - Ancla de A - Cubierta superior x 4 B - Batería recargable AAA de Ni-MH de C - Estaca x 4...
- Page 4 Mantenimiento Cómo reemplazar la batería PRECAUCIÓN: Al reemplazar la batería, usa una (1) batería recargable AAA de Ni-MH de 1.2 V y 900 mAh. IMPORTANTE: Desechar las baterías de acuerdo con las regulaciones locales, estatales y federales. NOTA: Para un mejor funcionamiento, reemplaza con una batería recargable AAA de NiMH de 1.2 V de 900 mAh cada 3 años o cuando el rendimiento disminuya.