Advertisement
Advertisement
Table of Contents
Related Manuals for Jands 4PAK
Summary of Contents for Jands 4PAK
- Page 2 JANDS Introduction is a four channel integrated desk/dimmer unit with both normal and audio chase, flash facility and full mastering over all channels. It has been designed for lower budget applications where portability and ease of operation are prime considerations. When used as a stand-alone dimmer, the features: •...
-
Page 3: Equipment Description
JANDS Equipment Description Layout 1. Channel output sockets: The four output sockets connect to the lamps. 2. Overload Circuit Breaker: The circuit breaker protects the from overloading and faults. 3. Channel faders: These faders control the channel output levels. 4. Master Fader: Controls the overall level from the channel faders and from the chaser. -
Page 4: Dimmer Operation
JANDS Dimmer Operation After unpacking, check for any obvious faults or defects. If any are apparent, return the unit to the place of purchase. Unwrap the power cord and plug into a GPO. Plug four lamps into the four output sockets and switch the power on at the wall and the rear panel. -
Page 5: Fault Finding Guide
JANDS Fault finding guide FAULT SYMPTOM POSSIBLE CAUSE REMEDY One channel is not working Faulty load or wiring Try the same load on a different channel to confirm. Internal channel fault Workshop service. Overload circuit breaker trips when Large incandescent load Set fader to 5% to preheat lamp. - Page 6 Information contained in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. JANDS P/L shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.