AFSC 1.7Q; AFSC 18QSL
7. Fitting
Fitting the gearbox housing
1
1. Press on the grooved ball bearing (1).
2. Press the bearing bush (2) into the correct position.
3. Grease the sealing ring (3).
4. Position the sealing ring (3).
Replace the sealing ring during each fitting.
C-SC_CSSM
Version 1.0
2
2017-05-08
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
.
Tools:
- Arbor press
- Sleeve
6 mm inner diameter
16 mm outer diameter
- Sleeve
34 mm inner diameter
42 mm outer diameter
Page 19 of 33