Upgrade Firmware; Factory Reset - Philips 8000 Series User Manual

TV Audio Setup
Follow the on-screen setup.
DTS Play-Fi TV Audio
DTS Play-Fi TV Audio
Stream this TV's audio to wireless speakes
Stream this TV's audio to wireless speakes
throughout your home.
throughout your home.
Learn more about DTS Play-Fi enabled speakers
Learn more about DTS Play-Fi enabled speakers
at play- .com
at play- .com
DTS Play-Fi TV Audio
DTS Play-Fi TV Audio
Connect Speakers
Connect Speakers
Select Speakers
Select Speakers
Volume
Volume
Surround sound Setup
Follow the on-screen setup.
Connect Speakers
Connect Speakers
1
1
Play-Fi Speaker
Play-Fi Speaker
3
3
TAW8506
TAW8506
2
2
1
This TV
2 Speakers
2
The home theater speakers are now
independent speakers.
3
TAW8506 is compatible with Philips DTS
Play-Fi enabled TVs. Please go to www.
philips.com/TAW8506/support for more
information.
www.philips.com/TAW8506/support

Upgrade firmware

To get the best features and support,
update your product with the latest firmware
version.
Update firmware via Philips Sound
(Settings > Fine Tune / Update Firmware)
The firmware for MCU and DSP can be
upgraded to the latest version via Philips
Sound powered by DTS Play-Fi. Please go
to settings menu and select PS Fine Tune /
Update Firmware option to check it out. If
the upgrade is released, the upgraded icon
can be pressed to proceed automatically.
Once this product is connected to Wi-Fi, it can
receive over-the-air firmware update. Always
upgrade with the latest firmware version to
improve the performance of this product.

Factory reset

Reset device to default setting.
1
Set is ON, press and hold the Wi-Fi
button for 15 seconds.
» You will hear a tone and then the
subwoofer will automatically restart.
2
The subwoofer is restored to factory
defaults.
9