Table of Contents
Advertisement
3 Connect
This section helps you connect your
subwoofer to a TV and other devices, and
then set it up.
For information about the basic connections
of your subwoofer and accessories, see the
quick start guide.
Note
•
For identification and supply ratings, see
the type plate at the back or bottom of the
product.
•
Before you make or change any connections,
make sure that all devices are disconnected
from the power outlet.
Connect to power
•
Before connecting the AC power cord,
ensure you have completed all other
connections.
•
Risk of product damage! Ensure that the
power supply voltage corresponds to
the voltage printed on the back or the
underside of the unit.
1
Connect the mains cable to the AC in~
socket of the subwoofer and then into a
mains socket.
or
*
Power cord quantity and plug type vary
by regions.
6
AC in ~
USB service
AC in ~
Connect to Wi-Fi
(wireless operation)
(For iOS and Android version)
By connecting this unit and mobile phones,
tablets (such as iPad, iPhone, iPod touch,
Android phones, etc.) to the same Wi-Fi
network, you can then use the Philips Sound
app powered by DTS Play-Fi to control the
subwoofer to listen to audio files.
1
Connect your phone or tablet to the
same Wi-Fi network that you want to
connect your subwoofer.
2
Download and install the Philips Sound
app powered by DTS Play-Fi on a
phone or tablet.
•
Make sure your router is turned on and
working properly.
3
Press and hold
located at the back cabinet for 8 sec to
trigger the Wi-Fi connection.
» Until the speaker make a second
tone and then release the button.
4
Wait until the Wi-Fi light indicator on
the back cabinet goes from a fast blink
to a slow pulse. When it begins pulsing
slowly, it indicates that the speaker is
entering the Wi-Fi setup mode.
5
Launch the Philips Sound App powered
by DTS Play-Fi. Follow the instructions
in the App to connect this product to
your Wi-Fi network.
(Wi-Fi) button
Advertisement
Table of Contents
