Deactivating Wi-Fi On The Appliance; Software Update; Resetting The Appliance Network Settings; Remote Start - Bosch WAX32LP0SN User Manual And Installation Instructiions

en Home Connect
15.6 Deactivating Wi-Fi on the
appliance
Press and hold
1.
three seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press repeatedly until the dis-
3.
play shows OFF.
a Wi-Fi is deactivated.
Note: The connection is automatically
re-established when the Wi-Fi is
switched back on.
15.7 Software update
Requirement: The display shows
UPd
Press and hold
1.
seconds.
Set the programme to position 6.
2.
a UPd appears on the display.
Press .
3.
a The software update is installed.
a If End is shown on the display, the
software update is installed.
Note: Do not switch off the appliance
while the software update is in pro-
gress.
15.8 Resetting the appliance
network settings
Press and hold
1.
3 seconds.
Set the programme to position 5.
2.
a The display shows rES.
Press .
3.
a The display shows YES.
Press .
4.
a The network settings are reset.
a If End is shown on the display, the
network settings are reset.
44
for at least
for approx. 3
for at least
15.9 Remote start
Enable the appliance for remote start
via the Home Connect app.
Activating remote start
Notes
¡ Remote start is deactivated for
safety reasons in the following
circumstances:
– Open the appliance door.
– Press .
– Press .
– Switch off the appliance.
– Following a power cut.
¡ For safety reasons, remote start
cannot be activated if the appli-
ance door is open.
Requirements
¡ The appliance is connected to your
Wi-Fi home network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
Press .
▶
If you press and hold the button
for at least 3 seconds, the
Home Connect menu opens.
If you briefly press the button, the
appliance is enabled for remote
start via the Home Connect app.
If you open the appliance door, the
function is automatically deactiv-
ated.
lights up.
a
Note: To deactivate the function,
press .
15.10 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-