en Installation and connection
Unscrew and remove the screws in
1.
the vertical transport struts using a
T20 screwdriver.
Remove the transport struts.
2.
Undo and remove the screws in
3.
the horizontal transport strut using
a T20 screwdriver.
16
Remove the transport strut.
4.
4.6 Connecting the appliance
Connecting the water inlet hose
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
Do not immerse the electrical
▶
AquaStop valve in water.
Connect the water inlet hose to a
1.
tap (26.4 mm = 3/4").