Table of Contents
Advertisement
15.4 Connecting the appli-
ance to the energy man-
ager
The energy manager manages the
power supply from your conventional
and alternative energy sources. If
your alternative energy sources gen-
erate sufficient energy within a
preselected time, the energy man-
ager will start the appliance. If insuffi-
cient energy is generated, the appli-
ance is started using energy from
conventional energy sources.
Requirements
¡ The energy manager uses the EE-
Bus standard.
¡ You have read the user manual for
the energy manager.
Press and hold
1.
3 seconds.
a The display shows Aut.
Set the programme to position 7.
2.
a The display shows EnG.
Press
.
3.
a The appliance is connected to the
energy manager.
a If the appliance has connected to
the energy manager successfully,
the display shows con and
If you want to start the appliance
4.
via the energy manager, activate
Flexstart.
→ "Activate Flex Start", Page 43
Activate Flex Start
Activate the Flexstart function to allow
the energy manager to start your ap-
pliance once your home photovoltaic
system is able to provide sufficient
energy or the energy tariff is good.
Requirement: The appliance is con-
nected to the energy manager.
Set the programme you require.
1.
for approx.
.
Press - + to set the required
2.
time period.
Press
.
3.
Press
.
4.
a If the display shows
start is activated.
a If the time changes on the display,
e.g. to 8 h, the energy manager
has established a time at which
your appliance can start.
a If the energy manager does not
start the programme within the set
time, the appliance starts the pro-
gramme itself. The programme
ends at the set time.
Note
Flex Start is deactivated for safety
reasons in the following
circumstances:
¡ Press
.
¡ Open the appliance door.
¡ Switch off the appliance.
¡ Power cut.
15.5 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold
1.
seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press
repeatedly until the dis-
3.
play shows On.
a Wi-Fi is activated.
Note: If Wi-Fi is activated, the appli-
ance will not switch itself off automat-
ically.
Home Connect en
, the Flex-
for approx. 3
43
Advertisement
Table of Contents
