S5 0M1G30302.5120
S6 0M1G30302.5120
S7 0M1G2940-10-225
S8 0M1G3030-6-47-CR3
2. Wiring connectivity diagram
3. Tools Required
List the type and size of the tools that would typically can be used to disassemble the product to a point
where components and materials requiring selective treatment can be removed.
Tool Description:
‐ Screwdriver (Phillip-head, Hexagonal head)
‐ Penknife
3.1Disassembly Procedures
Tools: 2 Power screwdrivers (φ=5mm, L=60mm); 1 small cross screwdriver; turnbuckle driver;
Setting: Power screwdriver torque A=6 kgF.Cm
Step
SCREW_BUTTON
SCREW_PANEL
SCREW_VESA
SCREW_REAR_COVER
Figure
1
2
4
2
TOOl
Remark