Table of Contents
Advertisement
FLASH HEAD CONNECTION, 8 CONDUCTOR
J2 Terminal block definitions:
NOTE: The Flash head and Power supply have the same protection board.
Two conductors are required for the Red Beacon and two for the White Strobe.
Red L864 Connections: Terminal block J2 pins 1 and 2
White L865 Connections: Terminal Block J2 pins 3 and 4
RED/BLACK (Pin1) = - (NEGATIVE) for Red L864
RED (Pin 2) = + (POSITIVE) for Red L864
WHITE/BLACK (Pin 3) = - (NEGATIVE) for White L865
WHITE (Pin 4) = + (POSITIVE) for White L865
WARNING: Take care to connect correctly, as incorrect operation can cause
damage to the driver modules.
Dialight Corporation 1501 Route 34 South
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
4 CONDUCTOR VERSION
Page 14 of 21
Document No.
9100-127-2044-99 Rev C
Release Date: August 2020
Farmingdale NJ 07727
Advertisement
Table of Contents
