WWAN (Wireless Wide Area Network) Module Removal
(For C732L & C732LT only)
Prerequisite:
Battery Pack Removal
1. Find the WWAN module (B) on the top assembly. Refer to
2. Disconnect WWAN antennas (A) connected to the WWAN card
3. Remove one (1) screw (C) securing the WWAN module in place
Figure 1-16. WWAN Module Removal
4. Remove the WWAN module (B) from the LTE board connector (D)
Figure 1-17. WWAN Module Removal
Disassembly Procedures
C
A
WEEE Annex VII Component: WWAN Module
B
D
Figure
1-10.
(Figure
1-16).
(Figure
1-16).
(Figure
1-17).
0
1-13