Kenmore 625.384200 Use & Care Manual page 19

8. Press SELECT again to display the alternating screens
shown in Figure 33.
BACKWASH & FAST RINSE TIMES: If you experience
salty tasting water after regeneration, you may need
to increase the backwash and fast rinse times. The
cycle times during regenerations are determined by
the softener's electronic controller. However, you
may increase the backwash and fast rinse times, in 1
minute increments. If you wish to increase the back-
r
wash time, use the
minutes to the backwash time. Then press SELECT to
display the alternating screens shown in Figure 34.
If you wish to increase the fast rinse time, use the
r
UP button to add up to 15 minutes to the fast
rinse time.
9. Press SELECT to return to the normal run (time of
day) screen.
Questions? Visit www.kenmorewatersolutions.com or call 1-800-695-2761.
Controller Features
Figure 33
UP button to add up to 15
Figure 34
TANK LIGHT
A light inside the salt storage tank will come on when-
ever you open the salt lid. A "Tank Light" icon is dis-
played when this light is on. The light turns off when
you close the salt lid. It will also turn off automatically
after 15 minutes if the salt lid is left open.
Tank Light
Icon
Figure 35
19