Download Print this page

Matco Tools MCL2050CHRG Operating Instructions Manual page 3

Lithium-ion 20v+battery charger

Advertisement

Available languages

Available languages

OPERATING INSTRUCTION
Installing Or Removing Battery Pack From The Tool
1 . Your new battery pack is not fully charged . You may need to
charge before use .
2 . Make sure the forward/reverse lever is in the neutral position
when installing or removing a battery .
3 . Slide type 20V + depress the front tab and pull the battery
forward and the tool in the opposite direction .
Charging The Battery Pack
1 . Battery may not charge when it is above a certain preset
temperature limit . Allow temperature of battery to cool before
charging .
2 . After charging, unplug the charger from the power source
and stow away in a safe place .
Also available separately
RSLIBCPC, Li-ion
Charger Power Cord.
MCL2050CHRG
MCL2050CHRG Lithium-ion 20V + Battery Charger
Power On
(Green light flashes slowly)
Battery Low
(Red light stays illuminated)
Battery charged 80%
(Green light flashes rapidly)
Battery charged 100%
(Green light stays illuminated)
Battery Pack temperature is too hot
or too cold (Red light flashes slowly)
Battery Pack malfunction
(Red and Green lights stay
illuminated)
Charger Operation
1 . Plug charge station into a 120 VAC outlet .
2 . To install slide type 20V + battery, slide the battery pack into
the charger as the arrow indicates . Push the battery pack
into place until click is heard . See figure 2 .
3 . Make sure the red light on the charger is "ON" . The battery
pack is now starting the charging cycle . If the battery pack is
excessively hot or cold, the charger will not begin charging
and the red indicator on the charging station will blink . When
the battery returns to between 0°C (32°F) and 50°C (122°F),
the charger will automatically begin charging . Ensure the
charging ambient temperature is between  0°C (32°F) and
40°C (104°F) .
4 . If both the red and green indicator lights are ON, the
batterypack does not comply or is defective . Please contact
your retailer .
5 . Unplug the unit after the charging process and keep in a dry,
cool place .
3
2 .
02/20/19

Advertisement

loading