Digital Voice Systems VC-55-PR User Manual page 5

VC-55™ PR Voice Codec Board
(Preliminary)
User's Manual
Special Handling Instructions
To avoid damage from the accumulation of a static charge, industry standard electrostatic discharge
precautions and procedures must be employed during handling and installation the VC-55™-PR
Vocoder Board.
1. Read Instructions and Users Manual – All of the safe handling and operating instructions should
be read before integration of the VC-55™- PR Vocoder Board begins. Failure to exercise
reasonable care and to follow all instructions and heed all warnings may result in injury to
property or to individuals.
2. Retain Instructions - The handling and operating instructions should be retained for future
reference.
3. Follow Instructions - All operating and use instructions should be followed.
Storage
To insure maximum shelf life in long term storage, VC-55-PR Vocoder board should be kept in an a
static shield, moisture controlled package at <40°C and <90% Relative Humidity
Installation
Ventilation - The VC-55™- PR Vocoder Board unit should be situated so that its location or position
does not interfere with proper ventilation and air circulation around the board.
Heat - The VC-55™- PR Vocoder Board unit should be situated away from devices that could act as a
heat source such as an amplifier.
Power Sources - The VC-55™- PR Vocoder Board should be connected to a power source only of the
type described in this Users Manual.
DVSI Confidential Proprietary
Information – Section
Page iii