KNOVA KN CP-2042B Operator's Manual page 7

ASSEMBLY
5. Attach the collector (C) to the two collector supports,
making sure the side hole is facing the collector body
as shown in figure 6.
6. The upper bag support should be attached to the collector
support as shown in figure 7.
Fig. 7
(C)
Fig. 6
7. Now attach one
end the hose (a)
to the collector
body and the
other end to the
side hole of the
collector. Secure
with the hose
clamps (m), as
shown in figure
8 and 9.
8. Your dust
collector
should
now look like
the one in
figure 10.
6
(a)
Fig. 8
(m)
Fig. 9
Fig. 10
(m)