Digital Spectrum MemoryFrame MF-8000 User Manual page 30

To Check Updates:
Frequently, we post updates that add features/enhancements to your Digital Picture Frame. To retrieve the updates:
With slideshow playing:
•
Press 'Menu' on the remote control to go to the main menu
Or at the main menu:
•
Select 'Settings' and press 'Enter' on the remote control
•
Select 'Check updates' and press 'Enter' on the remote control
•
If your Digital Picture Frame is already connected to the internet, it will check for any update
•
If the update is available. Select 'OK' and press 'Enter' will download the updates
•
Depending on the network speed, traffic, and the size of the updates, it might take a few minutes to download the updates
•
If the update is available and you do not want to update at this time, select 'Not at this time' and press 'Enter'
•
Once the download is complete, the frame will upgrade the software and reboot upon completion.
To Register your Digital Picture Frame:
See section 'Push slideshow to your Digital Picture Frame' above to register your fame and the benefit of registering your frame.
To Restore Default Settings:
With slideshow playing:
•
Press 'Menu' on the remote control to go to the main menu
Or at the main menu:
•
Select 'Settings' and press 'Enter' on the remote control
•
Select 'Restore default settings' and press 'Enter' on the remote control
To enable Auto Check Update:
With slideshow playing:
•
Press 'Menu' on the remote control to go to the main menu
Or at the main menu:
•
Select 'Settings' and press 'Enter' on the remote control
•
Select 'Auto Check Update – yes/no' and toggle 'Auto Check Update – yes/no' by pressing 'Enter' on the remote control
When Auto Check Update is enabled, frame will check for latest update when switched on.
To Set Standby Time:
With slideshow playing:
•
Press 'Menu' on the remote control to go to the main menu
Or at the main menu:
•
Select 'Settings' and press 'Enter'
•
Select 'Set standby time' and press 'Enter'
•
Use 'Up' 'Down' buttons on the remote control to set the 'hours' when the Digital Picture Frame will turn off
•
Press 'Right' on the remote control to select 'Off mins'
•
Use 'Up' 'Down' buttons on the remote control to set the 'minutes' when the Digital Picture Frame will turn off
•
Press 'Right' on the remote control to select 'Off AM/PM'
•
Use 'Up' 'Down' buttons on the remote control to set the AM or PM
•
Press 'Right' on the remote control to select 'On hours'
•
Use 'Up' 'Down' buttons on the remote control to set the 'hours' when the Digital Picture Frame will turn on
•
Press 'Right' on the remote control to select 'On mins'
•
Use 'Up' 'Down' buttons on the remote control to set the 'minutes' when the Digital Picture Frame will turn on
•
Press 'Right' on the remote control to select 'On AM/PM'
•
Use 'Up' 'Down' buttons on the remote control to set the AM or PM
•
Press 'Enter' on the remote control to set the standby time.