Prompt user if
frame is about to
Prompt me for new
receive new
pics
pictures
Display status
when frame is
Show OnLine
online and ready
status
to receive
pictures
Allows
Bluetooth
Bluetooth
connectivity to
either Accept all
pictures
(Default), Reject
all pictures, or
by prompt upon
receipt.
Network Requirement:
If your home network already has a wireless router, you are set. If your home network has a regular router, you need to purchase a wireless access point. Please refer to the manufacturer of the router and access point to configure
them.
Test your Network/Access Point:
•
Use your computer to connect to the router/access point, and make sure you can get on the internet.
In your Digital Picture Frame with slideshow playing:
•
Press 'Menu' on the remote control to go to the main menu
Or at the main menu:
•
Select 'Pictures' and press 'Enter'
•
Select 'Play Slideshow' and press 'Enter'
•
Select 'Photo Sharing site' and press 'Enter'
•
If 'Which site would you prefer' screen is displayed, your network is OK
•
If not, a list of access points will be displayed
•
Select your access point.
•
Important: If your access point is configured with 'WPA-PSK' or 'WPA'. The pass phrase is case sensitive.
•
If your access point is secure, a 'Security key' screen will display. Use the 'left', 'right', 'up', 'down' buttons to navigate the keyboard. Once the key is highlighted, press 'Enter' button to select the character. If you
enter the wrong character, select 'BS' to clear the character.
•
Select 'SHIFT' key and press 'Enter' on the remote control for capital letters or other characters.
•
Select 'SHIFT' key and press 'Enter' on the remote control to return to current keyboard.
•
Once, you are done entering the security key, select 'NEXT' on the keyboard, and press 'Enter' button on the remote control.
•
Digital Picture Frame will attempt to connect to your wireless network. It will take a few minutes. If the connection is successful, the 'Which site would you prefer' screen will display. If it is not successful, repeat the
above procedure. If it fails again, try to place the Digital Picture Frame closer to your router/access point.
•
Select 'From Webshots' and press 'Enter'. An album will be displayed.
•
If no album is displayed, or you encountered an error, please do the following:
The Digital Picture Frame might be too far away from the access point. Move it closer.
Wrong security key might be used. Check your access point security key and repeat the above procedure.
Need help?
Do you have a question about the MemoryFrame MF-8000 and is the answer not in the manual?
Questions and answers