Advertisement
Quick Links
Gather information about
1
your Wireless Network
SSID:
This is the name of your wireless network. See
your wireless routers documentation for the default setting.
WEP:
A WEP Key is a password required to access your
Wireless Network. If your router does not have WEP
security enabled, this option does not need to be configured
on the MemoryFrame.
2
Let's Go Wireless
Plug a compatible USB wireless adapter into the
MemoryFrame. Make sure the USB cable is
connected from the MemoryFrame to the PC.
Restart your MemoryFrame.
Make sure the USB cable is
connected from the
MemoryFrame to the PC.
USB wireless
adapter
Connect USB cable
Use Digital PixMaster to configure
3
your Wireless MemoryFrame
Open PixMaster
Select Digital Frame
(from the file menu)
Select Properties
Wire le ss Ne tworking G uide
Introduction
Wireless Networking allows you to send photo slideshows
created in PixMaster directly to your MemoryFrame without
using a USB cable.
Before continuing:
The PixMaster software should already be installed.
The MemoryFrame USB driver should already be
inst alled.
The MemoryFrame should be connected to the PC using
the USB cable.
The USB Wireless dongle should be inserted into the
MemoryFrame "Camera" USB socket.
Digital frame
Select your Digital Frame
Select "Set Wireless Info"
Click Configure
Enter your SSID (wireless
network name)
Digital Camera
Card Reader
Wireless Adapter
USB Thumb Drive
My Network
My Network
If wireless security is enabled select
"WEP" . Otherwise leave the
selection at none.
USB to Everything!
It's easy to transfer
pictures from a
digit al camera
,
play
or transfer from card
readers and thumb drives.
Just plug in the device,
press the menu button on
the MemoryFrame and
select "Import/Play from
USB port." You can then
select the desired action.
1.
2.
Main Menu
Menu B utton
R e s u m e s l i d e s h o w
C o n f i g u r e s l i d e s
I m p o r t / p l a y f r o m U S B p o r t
D e l e t e a l l s l i d e s f r o m M e m o r y
P r e f e r e n c e s
3.
Main Menu
<=Rev >=Fwd Select=Enter Menu=Exit
P l a y s l i d e s h o w
F i l l M e m o r y W i t h I m a g e s
R e p l a c e M e m o r y W i t h I m a g e s
I m p o r t I n d i v i d u a l I m a g e s
P l a y I m a g e s F r o m U S B P o r t
E x i t T h i s M e n u
<=Rev >=Fwd Select=Enter Menu=Exit
Click configure to Specify your
Wireless WEP key. Click on
"OK" then "Finish" when done.
You should now be able to send
slideshows wirelessly to the
Memoryframe.
Advertisement
