Advertisement
Available languages
Available languages
2 Secure the Base Bracket and the Mounting Hook
Unit on the wall using the four or more M8 or
equivalent screws (not supplied).
Select four screw holes with z mark shown in the
diagram below, and tighten the screws securely so
that they will not become loose.
(Remove the screws which were temporarily
attached in procedure 1, and detach the Mounting
Hook Unit from the Base Bracket as in the
(*1)
illustration
below.)
Align the unit so that it is exactly level.
Base Bracket
WARNING
• The screws required for this procedure are not
supplied.
• Select screws suitable for the material and
structure of the wall.
• If the Base Bracket cannot be attached securely
enough, use additional screws.
• Be sure to confirm that the Base Bracket is
securely attached to the wall.
(*1)
Step 4:
Preparing for the
installation of the TV
The procedure differs depending on the
TV. Apply the procedure appropriate for
the TV you are installing.
* Some models may not be available in certain regions.
KDL-32V2000/KDL-32S2000/
KLV-32V200A/KLV-32S200A................... A
KDL-40V2000/KDL-46V2000/
KLV-40V200A/KLV-46V200A................... B
KDL-40S2000/KLV-40S200A/
KLV-46S200A........................................... C
KLV-40X250A/KLV-46X250A/
KLV-52X250A/KLV-40X200A/
KLV-46X200A/KLV-52X200A/
KDL-40X2000/KDL-46X2000/
KDL-52X2000/KDL-40X200A/
KDL-46X200A.......................................... D
If you intend to install a TV that is not specified above, be
sure to refer to the leaflet "Installing the Wall-Mount
Bracket" supplied with your TV.
(Continued)
7
(GB)
Advertisement
