Table of Contents
Advertisement
ENG
Your device will run at a higher or lower temperature than the outside ambient temperature. To verify your
device will function under typical operating conditions, consult the device's manual to identify and record the
power consumption ( _______ wattage) and maximum operating temperature (_______ °).
Use chart below to determine the active enclosure temperature differential based on your device(s) power
consumption (wattage).
For example, if your device has a 20W power consumption, the temperature inside the active enclosure will
be -6.54°C (-11.77°F) lower than the outside ambient temperature. This temperature must not exceed the
manufacturer specified maximum operating temperature for your device.
Active Enclosure
Device(s) (not included)
5.6 F°
0.6 F°
-4.4 F°
-9.4 F°
-14.4 F°
20 Watts
68 BTU
OPERATING PARAMETERS
Temperature Differential vs. Load
30 Watts
102 BTU
Load in watts and BTU
Power Consumption
(Wattage)
20W
30W
40W
50W
60W
CAUTION
ENG - If active enclosure temperature exceeds device's
maximum temperature, the product may be damaged or
destroyed, voiding the warranty.
40 Watts
50 Watts
136 BTU
171 BTU
4
2019-09-26
Active Enclosure
Temperature Differential
Δ -6.54 °C (-11.77°F)
Δ -3.05 °C (-5.49 °F)
Δ -0.98 °C (-1.76 °F)
Δ 0.54 °C (-0.97 °F)
Δ 2.68 °C (4.82 °F)
60 Watts
205 BTU
#:180-9135-4
(2020-08-25)
4 C°
2 C°
0 C°
-2 C°
-4 C°
-6 C°
-8 C°
Advertisement
Table of Contents
