One Touch Recording (Dv Full Dubbing) - Sony VRD-MC1 Operating Instructions Manual

One Touch Recording (DV Full Dubbing)

Note
Before you start recording, change the [DV Full Dubbing setting] to [ON] in the Setup menu.
( page 33)
1
Connect the supplied power cord and AC adaptor to DVDirect.
2
Connect your digital video camera
(i.LINK) cable (not supplied).
Signal flow
* DV or Digital8 camcorder only. MICROMV camcorder is not supported.
3
Turn on the digital video camera and ready it for playback.
Hint
For most digital video cameras, switch the power/mode button to the playback or "VTR"
mode to play the tape or perform dubbing.
4
Set the mode switch on the left side of DVDirect to
[STANDALONE].
STANDALONE
DV (i.LINK) cable
PC/PRINT
to DVDirect with a DV
*
. Continued
DV IN
17