Murray 866015 Operator's Manual page 10

choke lever
The choke lever (Figure 1) opens and closes the choke
valve. The CLOSED position enriches the fuel mixture for
starting a cold engine. The OPEN position provides the
correct fuel mixture for operation after starting, and for
restarting a warm engine.
Ignition Switch
The ignition switch (a, Figure 2) controls the ignition
system. The ignition switch must be in the ON position for
the engine to start and run. Moving the ignition switch to
the STOP position stops the engine.
Throttle control Switch
The throttle control switch (a, Figure 3) controls engine
speed. Pulling the throttle trigger toward the control handle
grip increases engine speed. Releasing the throttle trigger
reduces engine speed.
Priming Bulb
Pressing the priming bulb (Figure 4) pumps fuel from the
fuel tank to the carburetor. This procedure is necessary for
starting the engine. Prime the clear fuel bulb at the bottom
of the carburetor until it becomes hard and full of fuel.
FeaTUReS aND cONTROlS
Figure 1
Figure 2
Figure 3
Figure 4
10
a
a