Subaru WRX 2020 Quick Manual page 27

Paddle Shift Control Switches (if equipped)
• You can shift gears using the paddle shift
control switches. To upshift to the next higher
gear, pull the "+" paddle on the right toward
you. To downshift to the next lower gear, pull
the"–" paddle on the left toward you.
• You can temporarily shift gears even when the
select lever is in the "D" position by pulling
either the "+" or "–" paddle toward you. Once
vehicle speed stabilizes, the transmission will
switch back to normal mode.
REV Alarm System (WRX STI only)
The REV alarm system automatically issues a
warning using the REV indicator light
whenever the tachometer needle enters the
red zone. This feature can be turned on or off
using the Combination Meter Display (CMD).
The REV alarm level can be set manually to an
engine speed of your choosing between
2,000 and 6,700 rpm. The Combination Meter
Display (CMD) is also used to select a warning
alarm buzzer in addition to the light. Please
refer to your Owner's Manual for more detailed
instructions on setting the engine speed alarm
level and selecting the warning buzzer.
SI-Drive
Subaru Intelligent Drive (SI-Drive)
SI-Drive has 3 modes; Intelligent (I), Sport (S) and Sport Sharp (S#). Each mode is
designed for different types of driving:
• Intelligent: The Intelligent (I) mode provides well balanced performance with greater fuel
efficiency and smooth driveability without stress. Power delivery is moderate during
acceleration for maximum fuel efficiency.
• Sport: The Sport (S) mode provides the engine power desired by those who want to
make the driving experience their own personal adventure.
OPERATING THE VEHICLE
25