Subaru WRX 2020 Quick Manual page 16

GETTING COMFORTABLE
Dual-zone Automatic Climate Control (WRX STI only)
You can set separate temperatures for the driver and passenger seats. Set your desired
temperature and let the system automatically make the adjustments for you. At any time,
you can manually take control of the climate settings.
Operation in Automatic Mode
1 Automatic Control Button: This system automatically controls all of the climate
systems except defogging. Press "AUTO" to activate. Press "OFF" to turn off the
system.
2 Temperature Control Dial: Turn the dial clockwise to increase the temperature or
counterclockwise to decrease the temperature. The temperature will appear on the
screen. You can adjust separate temperature settings for the driver's side and
passenger's side.
When using "Full Auto" mode, the fan speed, airflow distribution, air-inlet control and air
conditioning compressor are controlled automatically. In "Auto" mode the system allows
you to choose the fan speed and airflow distribution while it controls the output
temperature. To activate "FULL AUTO" mode:
• Press the "AUTO" button. The "FULL AUTO" indicator light illuminates on the climate
control display.
• Set the preferred temperature using the temperature control dial.
If you operate any of the buttons other than "OFF", rear window defogger, DUAL or the
temperature control dial, the "FULL" indicator light will turn off. The "AUTO" light will
remain illuminated. You can then manually control the system as desired. Press the
"AUTO" button to change back to "FULL AUTO" mode.
Operation in Manual Mode
3 Recirculated/Outside Air Button: Press this to prevent outside air from entering
your Subaru. Press the button again to allow outside air into your Subaru. NOTE: To
prevent windshield fogging, do not remain in the recirculated mode for an extended
period of time.
14