Subaru WRX 2020 Quick Manual page 22

CONTROLS
WINDSHIELD WIPERS
To turn on the wipers, press the wiper control
lever down one position for intermittent, two
positions for low speed, or three positions for
high speed. To turn the wipers off, return the
lever to the "OFF" position. For a single wipe,
move the lever up one position.
When the lever is in the intermittent position,
rotate the dial to adjust the operating interval
of the wipers.
Pull the lever toward you to spray washer fluid. The washer will spray until you release the
lever, then wipe twice.
INSTRUMENT PANEL SWITCHES (LOWER LEFT)
1 BSD/RCTA OFF switch (if equipped)
2 Illumination Brightness Control
3 Trunk lid release switch
4 Vehicle Dynamics Control OFF switch (if
equipped)
20