If operating a power tool in a damp location is Your Stanley FatMax reciprocating saw has been designed unavoidable, use a residual current device (RCD) for sawing wood, plastics and sheet metal. This tool is protected supply.
ENGLISH (Original instructions) exhibit unpredictable behaviour resulting in fire, repaired. c) Disconnect the plug from the power source and/ explosion or risk of injury. or remove the battery pack, if detachable, from the f) Do not expose a battery pack or tool to fire or power tool before making any adjustments, excessive temperature.
Chargers way the tool is used, including taking account of all parts of Use your Stanley FatMax charger only to charge the the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the...
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Stanley FatMax Service Centre in order to avoid a hazard. Warning! Let the tool work at its own pace. Do not overload.
Page 7
Clamp the workpiece securely and remove all nails and metal objects. The performance of your tool depends on the accessory used. Holding the tool with both hands, work with the shoe (3) Stanley FatMax accessories are engineered to high quality...
NiCd, NiMH and Li-Ion batteries are recyclable. Take them Your Stanley FatMax tool has been designed to operate over a long period of time with a minimum of maintenance. to any authorised repair agent or a local recycling station.
Page 12
ENGLISH (Original instructions) Australia & New Zealand Stanley Black & Decker www.stanleytools.com.au www.stanleytools.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 810 Whitehorse Road Box Hill VIC 3128, Australia NA006012 01/21...