4. Disassembly and Assembly Procedures
4.1 Disassembly SOP
Preparation before disassembly
1. Clean the room for work
2. Identify the area for material
3. Prepare the implement, equipment, materials as bellow:
1)
Working table
2)
Philips-head screwdriver
3)
Hex-head screwdriver
4)
Gloves
5)
Cleaning cloth
6)
ESD protection
Item
1
2
2
Picture
1
2
3
Operation
To remove the stand:
1. Place the monitor on a
soft cloth or cushion at
the edge of the desk.
2. Press and hold the
stand release button at
the back of the display.
3. Lift the stand assembly
up and away from the
monitor.
1. Unlock 4 RC screws
2. Disassemble Rear
Cover from Middle
Frame according to the
sequence shown in the
picture
- 8 -
Tool
Notes
Philips-head
screwdriver
Torsion of RC
screw: 9±1Kgf