Operation; Dmx Control - Showven Creeper AQ mini User Manual

Hide thumbs Also See for Creeper AQ mini:
Table of Contents

Advertisement

▲ Operation

①Check the machine and accessories, ensure it is in good status. Place the machine on a flat
surface, tilting may result in inaccurate water level alarm.
②Fill the liquid tank with FX-M Pro medium fog fluid. Please use original fog fluid from
SHOWVEN, Warranty will be void if any other type fog fluid is used.
③Connect the machine to suitable rated power supply. Please ensure power supply meets the
requirement. Always connect the machine to a protected circuit and ensure it is properly
grounded.
④Turn on the machine, it heat up automatically, and shows "WARMING UP" on LCD screen.
⑤Water Tank Filling
Method 1:
Open the lid of"water filling port", fill the water tank with pure water, please pay attention
to the water level show on liquidometer, stop filling when it is reached the black line. Or until
the water shortage alarm on LCD screen disappear.
Method 2:
Useφ8 tubes connect with quick connector on machine, and the other end put into exterior
tank, press MENU enter setup interface, find the "Auto Pump" and switch it in to ON status,
press ENTER key to save the change. Machine will filling the inner water tank automatically,
just keep the water in exterior tank is enough for the show. When not use exterior tank,
please do set the "Auto Pump" to OFF status.
⑥Once the machine has reached operating temperature, temp., fog output and fan speed
will show on the screen, please adjustable it accordingly.
⑦Press "+"to start making fog, press "ENTER"to stop.
⑧To turn off the machine, please POWER OFF and unplug the power cable.
⑨For transportation or not use for a long time, please remove the fog output pipe. Drain the
remaining water from fog output nozzle.

▲ DMX Control

2 channel mode
Channel
First Channel(CH1)
Second Channel(CH2)
SHOWVEN Creeper AQ mini Low Fog Generator USER MANUAL -5-
Function
Fog output: DMX VALUE 6-255, fog output from 1-100. As
volume increase, the denser the fog, the longer for dissipate.
Fan speed: DMX VALUE 6-255, fan speed from 1-100. As
volume decrease, the better the fog stick to the ground but
spread slower.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Creeper AQ mini and is the answer not in the manual?

Table of Contents