Roland HU-600 User Manual page 15

Control Panel
Display
[C1] Indicator
This indicator lights
when the heater is op-
erating. It goes dark
when heater tempera-
ture reaches the preset
temperature and the
heater stops operating.
This indicator lights when
the heater is switched on.
Do not press the [SEL] key.
Doing so may cause malfunction
of the heater, leading to fire or
electrical shock.
[SEL] Key [ ] Key
[ ] Key
Pressing this key one time increases the preset
temperature by 1 ºC.
[ ] Key
Pressing this key one time lowers the preset tem-
perature by 1 ºC.
[POWER] Switch
This switches the heater on and off.
When switching off the power for the
printer, be sure to switch off the heater as
well.
Switching off the printer doe not switch off
the power for the heater. Never leave only
the heater switched on and powered.
Indicators other than [C1]
do not light.
PV
(Heater temperature)
This shows the current
temperature of the heater.
It displays error messages
in the event of a problem
in the heater unit.
SV
(Preset temperature)
This shows the preset
temperature of the heater.
[ ] Key
Chapter 1: Installation
13