Diagnostics Functions - Abus Profiline AZ6450 Installation And Operating Instructions Manual

Description of command
F1RS...F8RS: Assignment of
resets
Assignment of resets to contacts
V1RE...V4RE: Assignment of
voice messages
Assignment of voice messages to
contacts

10.2.6 Diagnostics functions

The diagnostics functions are available to both the installer and the user (see also
11.5/11.6), so the user code (default: 1234) must be used here.
Description of command
STATUS
Status of mains voltage, battery,
telephone line and GSM signal strength
SFTR
Current software version of device
SI
Status of inputs
SU
Status of outputs
CLK
Reply by SMS about device date and
time
CLK
Change of device date and time
Options
1: Input 1
2: Input 2
3: Input 3
4: Input 4
5: Tamper
6: PSTN fault
8: Main power loss
9: Low battery
1: Input 1
2: Input 2
3: Input 3
4: Input 4
5: Tamper
6: PSTN loss
8: Main power loss
9: Low battery
11: Periodic test
SMS structure
"CODE" "STATUS"
Example: 1234 STATUS
"CODE" "SFTR"
Example: 1234 SFTR
"CODE" "SI"
Example: 1234 SI
"CODE" "SU"
Example: 1234 SU
"CODE" "CLK"
Example: 1234 CLK
"CODE" "CLK" "dd/mm/yy,hh,mm"
Example: 1234 CLK 01/06/08,18,30
20
Default
0