Casio 3476 Owner's Manual page 14

Important!
• Normally, your watch should show the correct time as soon as you select your
Home City code. If it does not, it should adjust automatically after the next auto
receive operation (in the middle of the night). You can also perform manual receive
(page EN-24) or you can set the time manually (page EN-40).
• The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see "Home
City Codes and Transmitters" (page EN-16).
• Under factory default settings, auto receive is turned off for all of the following city
codes: HNL (Honolulu), ANC (Anchorage), MOW (Moscow), HKG (Hong Kong), and
BJS (Beijing). For details about turning on auto receive for these city codes, see "To
turn auto receive on and off" on page EN-25.
• You can disable time signal reception, if you want. See "To turn auto receive on
and off" on page EN-25 for more information.
• See the maps under "Approximate Reception Ranges" (page EN-17) for information
about the reception ranges of the watch.
EN-12