Upgrading memory modules
Your VivoMini comes with two SO-DIMM memory slots that allow
you to install two 2GB, 4GB, or 8GB unbuffered non-ECC 1.2V DDR4
260-pin SO-DIMMs for a maximum of 16GB memory.
IMPORTANT! Refer to http://www.asus.com for the list of compatible
DIMMs. You can only install 1.2V DDR4 260-pin SO-DIMM to the
VivoMini's DIMM slots.
To install or upgrade the memory modules:
1.
Follow steps 1-4 under the Installing 2.5" hard disk drive / solid
state drive section to remove the top cover of your VivoMini.
2.
Remove four screws from the HDD1L bracket and remove the
bracket.
HDD1L
HDD1R
VivoMini VC68 Series
27