Table of Contents
Advertisement
Upgrading memory modules
Your VivoMini Barebone comes with two SO-DIMM memory slots
that allow you to install two 2 GB, 4 GB, or 8 GB unbuffered with non-
ECC 1.2V DDR4 204-pin SO-DIMMs for a maximum of 16 GB memory.
IMPORTANT! You can only install 1.2V DDR4 SO-DIMM to the
VivoMini's DIMM slots.
NOTE: Refer to http://www.asus.com for the list of compatible
DIMMs.
To install or upgrade the memory modules:
1.
Turn off your VivoMini.
2.
Disconnect all cables and peripherals.
3.
Place the VivoMini on a flat and stable surface.
4.
Press down the latch at the rear panel to release the top cover.
VivoMini V Series Barebone
22
Advertisement
Table of Contents
