Muddy Or Acidic Water; Anti-Fouling Paint; Motor Disposal Requirements; Emergency Equipment - Yamaha F200 Owner's Manual

Specifications and requirements
piston rings begin sticking. Performance
drops and engine wear increases dramatical-
ly.
While many additives available may reduce
deposits, Yamaha recommends the use of
Ring Free Fuel Additive, available from your
Yamaha dealer. Ring Free Fuel Additive
has repeatedly proven its ability to clean com-
bustion deposits from inside the engine, nota-
bly the critical piston-ring-land area, and fuel
system components. Follow product labeling
for use instructions.
EMU36880

Muddy or acidic water

Yamaha strongly recommends that you have
your dealer install the optional chromium-plat-
ed water pump kit if you use the outboard mo-
tor in muddy or acidic water conditions.
However, depending on the model it might not
be required.
EMU36330

Anti-fouling paint

A clean hull improves boat performance. The
boat bottom should be kept as clean of marine
growth as possible. If necessary, the boat bot-
tom can be coated with an anti-fouling paint
approved for your area to inhibit marine
growth.
Do not use anti-fouling paint which includes
copper or graphite. These paints can cause
more rapid engine corrosion.
18
EMU36341

Motor disposal requirements

Never illegally discard (dump) the motor.
Yamaha recommends consulting the dealer
about discarding the motor.
EMU36351

Emergency equipment

Keep the following items onboard in case
there is trouble with the motor.
A tool kit with assorted screwdrivers, pliers,
G
wrenches (including metric sizes), and
electrical tape.
Waterproof flashlight with extra batteries.
G
An extra engine shut-off cord (lanyard) with
G
clip.
Spare parts, such as an extra set of spark
G
plugs.
Consult your Yamaha dealer for details.
EMU25221

Emission control information

EMU25230

North American models

This engine conforms to U.S. Environmental
Protection Agency (EPA) regulations for ma-
rine SI engines. See the label affixed to your
engine for details.
EMU31560
Approval label of emission control certifi-
cate
This label is attached to the bottom cowling.
New Technology; (4-stroke) MFI
1. Approval label location