Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual page 21

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
amplifier (receiver) has a digital input jack, use
deck, use . In this case, you can also connect the player directly to the MD deck or DAT
B-2
deck without using your stereo amplifier (receiver).
xRecommended surround sound effects for the
TVS STANDARD (page 43)
z
B-1
In connection , you can use the supplied audio/video cord instead of using a separate audio cord.
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
Note
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the
CD/DVD player
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
B-2
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital input
[Speakers]
Front
(L)
Front
(R)
l: Signal flow
LINE OUT S VIDEO COMPONENT
VIDEO OUT
OUT
Y
R-AUDIO 1-L VIDEO 1
P
B
P
R
R-AUDIO 2-L VIDEO 2
Coaxial digital
cord (not supplied)
or
Stereo amplifier (receiver)
. When connecting to an MD deck or a DAT
B-2
connection only
B-1
Stereo audio cord
(not supplied)
(white)
(red)
or
(white) (red)
to audio input
MD deck/DAT deck
. If the
B-1
B-2
connection.
B-1
LINE OUT
R-AUDIO 1-L VIDEO 1
R-AUDIO 2-L VIDEO 2
continued
21