Specifications - Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual

Specifications

System
Laser
Signal format system
Audio characteristics
Frequency response
Signal-to-noise ratio (S/N ratio)
Harmonic distortion
Dynamic range
Wow and flutter
The signals from LINE OUT L/R (AUDIO) 1/2 jacks are measured. When you play PCM sound tracks with
a 96 kHz sampling frequency, the output signals from the DIGITAL OUT (COAXIAL and OPTICAL) jacks
are converted to 48 kHz sampling frequency.
Outputs
Jack name
DIGITAL OUT (OPTICAL)
DIGITAL OUT (COAXIAL) Phono jack
LINE OUT (AUDIO) (1, 2)
LINE OUT (VIDEO) (1, 2)
S VIDEO OUT
COMPONENT
VIDEO OUT (Y, P
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Supplied accessories
See page 14.
Specifications and design are subject to change without notice.
E S
NERGY TAR
has determined that this product meets the
66
Semiconductor laser
NTSC
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
115 dB (LINE OUT L/R (AUDIO) jacks 1, 2 only)
0.003 %
DVD: 103 dB
CD: 99 dB
Less than detected value (±0.001% W PEAK)
Jack type
Optical
output
jack
Phono jack
Phono jack
4-pin mini DIN
Phono jack
, P )
B R
120V AC, 60 Hz
110 to 240V AC, 50/60 Hz
See page 3 for further information.
12 W
See page 3 for further information.
430
projecting parts
2.7 kg (5 lb)
5 C to 35 C (41 °F to 95 °F)
25 % to 80 %
is a U.S. registered mark. As an
R
Maximum output level
-18 dBm
0.5 Vp-p
2 Vrms (50 kilohms)
1.0 Vp-p
Luminance signal: 1.0 Vp-p
Color signal: 0.286 Vp-p
Y: 1.0 Vp-p
P , P : 0.7 Vp-p
B R
74 256 mm (17 × 3 × 10
E
NERGY
E S
NERGY TAR
Load impedance
Wave length: 660 nm
75 ohms terminated
Over 10 kilohms
75 ohms, sync negative
75 ohms, sync negative
75 ohms terminated
75 ohms, sync negative
75 ohms terminated
1 / in.) (width/height/depth) incl.
8
S
TAR Partner. Sony Corporation
R
guidelines for energy efficiency.
R