7. Device connections
Laser aperture
warning label
DMX address,
operation mode
Interlock
8. Operation
a.
Connect the power cable to the device and then to the mains
b.
Insert the key into the key switch and turn it „ON"
c.
Connect the Interlock Connector with the Interlock interface
d.
Press „ON" to switch the device on
8.1. Automatic, Stand-alone operation
Set the device to auto mode:
DMX out DMX in
LEDs:
Sound sensitivity,
Laser emission
microphone
trim pot for
music-sensitivity
key switch
ON/OFF switch
mains connection